Q: If my tyres have been treated with another product, can I still apply in the tyres?
A: NO. It is advised not to add to existing products. Excessive amounts of sealant will be detrimental to the balance of the tyres. It is recommended to remove the tyre from the rim, hose out the inside of the tyre, and wipe dry with a cloth before applying .

Q: I've tried all the other products on the market, and none of them work?
A: 1. Find out what the application for which it was purchased, for instance an All Terrain Vehicle - the product they had bought could be too thick for the low air pressure in these type of tyres to move the product quickly to the punctured area.
2. It has often been found that the customer had not used a sufficient amount of product for the size of tyre, and/or the punctured area has just been too large.
3. Most other products will dissolve in water, however will not dissolve in water once cured.

Q: Can the product be used in tractor tyres?
A: Find out if the tyre is water ballasted. If so, then the product cannot be used in these tyres.

Q: What is the product?
A: The product is a modified natural rubber base which has been designed to work in extreme climatic conditions.

Q: Does the product cause imbalance?
A: No. The product hydro dynamically balances the tyre with centrifugal force, meaning it radiates away from the centre.

Q: Does the product drain to the bottom of the tyre when stationary?
A: After the treated tyre has been roaded, the product adheres to the inside tread area, and only a small amount would settle.

Q: Does the product affect rubber?
A: No. has no effect on rubber, and washes out for retreading.


Have a question? Ask us.